Adjusting gasket

There are two structural forms for adjusting shim products: two-layer and three-layer, which are used for supporting installation and adjusting the level of machine tool equipment.

Adjusting the installation of the pad iron machine tool does not require setting anchor bolts to fix it to the ground, providing good vibration reduction and equivalent vertical deflection, making the machine tool stable on the ground. Save installation costs and shorten installation cycles. The machine tool position can be changed at any time according to production, and the cost of secondary installation makes it possible to install the machine tool upstairs. It can adjust the level of the machine tool, with a large adjustment range and convenience. The shock absorber pad is made of nitrile synthetic rubber, which is resistant to grease and coolant.

Adjust the selection of shim iron

1. The weight of the machine tool and the number of fastening holes on the machine tool base;

2. The bearing capacity of each shim is equal to the total weight of the machine tool divided by the number of fastening holes; (If conditions permit, consider the center of gravity position of the machine tool and determine the weight distribution)

3. Choose the desired result based on the type of machine tool used;

4. Check if the diameter and length of the machine tool base holes and bolts match.

Adjusting the usage method of the shim

Place the adjusting sizing block under each stress point of the machine tool. After each sizing block is stressed, adjust the sizing block. The adjustable height is 3mm-15mm, and the cast iron adjustment pad iron is easy to adjust and flexible to migrate. It does not require drilling holes or burying anchor screws, and does not damage the ground. It is a major reform in the installation process of machine tool equipment. It can exhibit the same dynamic characteristics as the bed, improve the machining accuracy of the machine tool, and has the functions of shock resistance and noise reduction. Save labor, time, materials, and overall economic benefits. Solved the contradiction of uncertain ground foundation caused by equipment selection difficulties for the design department. Widely applicable and suitable for installing various types of machine tools and equipment.