Circular shock-absorbing pad iron

Circular shock-absorbing pad iron is manufactured according to standards for supporting and installing machine tool equipment, adjusting the level. The products come in fixed and mobile types.

Features: The damping rubber attenuates the vibration of the machine itself, reduces the transmission of vibration force, and prevents the transmission of vibration. Installing the machine tool does not require setting anchor bolts to fix it to the ground. Save installation costs and shorten installation cycles. Adjust the degree of the machine tool, with a wide range. Made of nitrile synthetic rubber, resistant to grease and coolant.

Scope of application: Equipment without installation holes for bed machine feet. Metal processing machines, satin pressing machines, textile, printing machinery, food processing machines, rubber machinery, wire and cable machinery, generators, and heavy equipment.

Usage: Place the required shim under the foot hole of the machine tool, insert the bolt, screw it into contact with the load-bearing plate, and then adjust the level of the machine tool (rotate the bolt clockwise to raise the machine tool). After adjusting the level of the machine tool, tighten the nut and fix it in a horizontal state.

The shock-absorbing rubber of the circular shock-absorbing pad iron attenuates the vibration of the machine itself, reduces the transmission of vibration force, prevents the transmission of vibration force, improves the precision and quality of machining dimensions, and controls the resonance propagation of vibration force and noise in building structures. Make various types of rough and precision machining machine tools form production units to adapt to the development of logistics technology. Installing the machine tool does not require setting anchor bolts to fix it to the ground, providing good vibration reduction and equivalent vertical deflection, making the machine tool stable on the ground, saving installation costs, and shortening installation cycles. The shock-absorbing pad iron of the machine tool can achieve convenient adjustment of the level of the machine tool Machine tool shims can be adjusted in position according to changes in production processes.

Steel circular shock-absorbing pad iron: Installing the machine tool does not require setting foot bolts to fix it to the ground, providing good vibration reduction and equivalent vertical deflection, making the machine tool stable on the ground Save installation costs and shorten installation cycles The machine bed can be changed at any time according to production, and the cost of secondary installation makes it possible to install the machine tool upstairs It can adjust the level of the machine tool, with a large adjustment range and convenience Used for synthetic rubber, resistant to grease and coolant Scope of application: Metal processing machines, forging machines, textile and printing machinery, food processing machines, rubber machinery, wire and cable machinery, packaging machinery, generators, and heavy equipment. Usage: Place the required shim under the foot hole of the machine tool, insert the bolt, rotate it until it is in contact with the load-bearing plate, and then adjust the level of the machine tool (rotate the bolt clockwise to raise the machine tool) After adjusting the level of the machine tool, tighten the nut and fix the level state. Due to the creep phenomenon of rubber, adjust the level of the machine tool again two weeks later when using the shim.

Cast iron circular shock-absorbing pad iron: The shock-absorbing rubber attenuates the vibration of the machine itself, reduces the transmission of vibration force, and suppresses the transmission of vibration Installing the machine tool does not require setting anchor bolts to fix it to the ground Save installation costs and shorten installation cycles. Adjust the machine tool degree, with a wide range, using nitrile synthetic rubber, resistant to grease and coolant. Scope of application: Equipment without foot mounting holes. The scope of application and usage methods are the same as above.

Overall, compared with cast iron damping pads, steel damping pads have a bright and beautiful appearance, heavy load-bearing capacity, and light weight per piece. Cast iron damping pads do not have the same appearance as steel damping pads, but they are heavy in weight and have a wide range of height adjustments.