Floor boring machine workbench

The purpose of the floor boring machine worktable is mainly for machine tool machining work surfaces, with bolt holes and T-shaped grooves on it, used to fix workpieces and clean iron filings generated during machining. Common machine tool workbenches include: floor boring machine workbenches and floor milling machine workbenches.

The material of the floor boring machine worktable is gray cast iron HT200-250, with a working face hardness of HB170-240. The casting has undergone two manual annealing processes at 600 ℃ -700 ℃ or natural aging for 2-3 years to remove internal stress and ensure stable accuracy.

The floor boring machine worktable is usually called boring machine worktable, boring machine platform, boring milling machine worktable, or machine tool worktable.

Machine tool worktable is an auxiliary tool in machine tool operation, which includes: floor boring machine worktable, gantry planer worktable, gantry milling machine worktable, machining center worktable, milling machine worktable, boring machine worktable, engraving and milling machine worktable, vertical lathe worktable, gantry boring and milling machine worktable, etc.

The purpose of the floor boring machine worktable is mainly for the use of machine tool machining workplanes. The worktable has holes and T-shaped grooves to fix the workpiece and clean the iron filings generated during machining. Common machine tool workbenches: floor boring machine workbenches, boring and milling machine workbenches.

The material of the floor boring machine is cast iron HT200-300, with a worktable hardness of HB170-240. After two manual treatments (manual annealing at 600-700 degrees and natural aging for 2-3 years), the accuracy of using this product is stable.

Common knowledge of boring machine worktable installation: The installation methods of boring machine worktable (cast iron platform) include platform bracket installation, anchor installation, shim installation, and anchor bolt installation.

Anchor installation: The boring machine worktable can be designed for anchor installation. Firstly, the user prepares the foundation and pre embedded holes according to the drawing of the worktable platform. Then, the anchor is placed in the reserved hole set in advance, and the cast iron platform is adjusted horizontally.

Installation of shim: Adjust the cast iron platform to a horizontal position and evenly distribute the load on each support point.