How to prevent deformation of marble platforms

In order to prevent deformation during the lifting and inspection of the marble platform, four steel wire ropes of the same length should be used to simultaneously hang the four lifting holes on the inspection platform, and the inspection platform should be smoothly lifted onto the transportation vehicle. Place and level the support points of the inspection platform, ensuring that each support point is evenly stressed and the entire inspection platform is stable. When using the inspection platform, handle the workpiece gently and do not move rough workpieces on the inspection platform to avoid damage such as bumps and scratches on the working surface of the inspection platform. In order to prevent overall deformation of the inspection platform, after use, the workpiece should be removed from the inspection platform to avoid long-term heavy pressure on the inspection platform, which may cause deformation of the inspection platform. When the inspection platform is not in use, the working surface should be cleaned in a timely manner, then coated with a layer of anti rust oil, covered with anti rust paper, and covered with the outer packaging of the inspection platform to prevent damage to the working surface of the inspection platform caused by carelessness. The inspection platform should be installed in a ventilated and dry environment, away from heat sources, corrosive gases, and corrosive liquids. During the installation of the inspection platform, the various support points of the inspection platform will be padded and compacted with adjustment shims, and the technical personnel will adjust the inspection platform to a qualified accuracy.