The editor teaches you the method of installing and debugging the marking platform

Hebei Fengquan Machinery Manufacturing Co., Ltd; Located in Botou City, Hebei Province, with convenient transportation and good location, it is a company engaged in casting, machining, and machine tool manufacturing. Laifengquan Machinery has always been dedicated to the manufacturing of heavy equipment, striving to become one of the solution providers for large cast iron measuring tools, granite measuring tools, large machine tools, and mechanical manufacturing solutions.

The use of cast iron marking platform flat plates is very extensive. Due to the development of industrial production, marking flat plates are used in more than 20 industries such as machinery, machine tool manufacturing, electronics, and power. It is used in more than 20 industries such as machinery, machine tool manufacturing, electronics, and power.

Marking Platform; Purpose: The marking platform is used for power experiments and equipment debugging of machinery and engines, with good planar stability and toughness. The surface of the marking platform has a T-shaped groove, which can be used to fix experimental equipment. The use of a marking plate (marking platform) is based on the size requirements of the product drawing, using a marking needle tool to mark the contour lines of the parts to be processed or as reference points and lines on the blank or semi-finished product. In single piece or small batch production, marking is used to check the shape and size of the blank or semi-finished product, allocate the remaining space on each processing surface reasonably, detect non-conforming products early, and avoid wasting subsequent processing time.

Material of the marking platform: cast iron HT200-300, with a working face hardness of HB170-240. After two manual treatments (manual annealing at 600-700 degrees and natural aging for 2-3 years), the accuracy of the marking platform is stable and good.

Accuracy of the marking platform: According to China's standard metrological verification regulations, it is divided into four levels: 0, 1, 2, and 3.

Debugging method for marking platform:

Place the marking platform flat on the ground, adjust the stability of the four corners by hand, and fine tune the movable foot until it is stable.

Place the marking platform on the bracket and adjust its pivot position as close to the center symmetry as possible.

Adjust each foot initially to ensure even force distribution at each pivot point.

Use a level measuring instrument (such as a spirit level or electronic level) to check the horizontal condition of the tablet and adjust the relevant pivot points until they meet the horizontal position.

After the initial adjustment is qualified, let it stand for 12 hours before copying. If it is unqualified, it needs to be adjusted again. If it is qualified, it can be used.

After use, conduct periodic testing and maintenance based on the actual on-site environment.

Production process of marking platform:

1. Develop production plans and design drawings;

2. Production of EPC foam type;

3. Sand pit design;

4. Pouring;

5. Tempering of raw castings;

6. Rough machining of machine tools;

7. Conduct secondary tempering to prevent internal stress and deformation;

8. Perform precision machining on the machine tool and ensure that the platform dimensions are in place;

9. Platforms with high flatness requirements should be manually scraped and ground;

10. Process the appearance of the platform and package it.

The above is the relevant information that the editor has compiled for everyone. Please follow the center for more information;.