How many aspects should be taken into account to prevent deformation of the marking platform? Follow now!

Hebei Fengquan Machinery Manufacturing Co., Ltd. is located in Botou City, Hebei Province, with convenient transportation and a good location. It is engaged in casting, machining, and machine tool manufacturing; The company. Laifengquan Machinery has always been dedicated to the manufacturing of heavy equipment, striving to become one of the solution providers for large cast iron measuring tools, granite measuring tools, large machine tools, and mechanical manufacturing solutions.

Marking Platform; It is a basic tool with high flatness requirements. To prevent deformation, attention should be paid to three aspects: support, lifting, and use

1. During the installation of the marking plate, the various support points of the marking plate should be padded and compacted with adjusting shims, and the marking plate should be adjusted to qualified accuracy by technicians. When using the marking plate, handle the workpiece gently and do not move rough workpieces on the marking plate to avoid damage such as bumps and scratches on the working surface of the marking plate.

2. In order to prevent deformation during the lifting of the marking plate, four steel wire ropes of the same length should be used to simultaneously hang the four lifting holes on the marking plate, and the marking plate should be smoothly lifted onto the transport vehicle. Place and level the support points of the marking plate, ensuring that each support point is evenly stressed and the entire marking plate is stable. The marking plate should be installed in a ventilated and dry environment, away from heat sources, corrosive gases, and corrosive liquids.

3. In order to prevent the overall deformation of the marking plate, after use, the workpiece should be removed from the marking plate to avoid long-term heavy pressure on the marking plate, which may cause deformation of the marking plate. When the marking plate is not in use, the working surface should be cleaned in a timely manner, then coated with a layer of anti rust oil, covered with anti rust paper, and covered with the outer packaging of the marking plate to prevent damage to the working surface of the marking plate caused by carelessness.

The above is the relevant information that the editor has compiled for everyone. Please follow the center for more information;.