Guide you to understand marble components

Marble components are suitable for the working environment on site and have the characteristic of maintaining the accuracy of the product itself for a long time, determining the accuracy of processing and testing in the working environment and the quality of the working product. Especially in terms of measurement. Marble components are generally used for measuring instrument workbenches and bed frames. Marble components have the advantages of high strength and no deformation. We can process and customize according to different customer needs.

1. No rust, no maintenance required, good service life.

2. Good stability and not easily deformed. Can measure accuracy at room temperature.

3. During measurement, it can slide smoothly without any discomfort.

4. The characteristics of marble components are abrasion resistance and maintenance. Physically stable, well-organized, grain shedding upon impact, no burrs on the surface, and no impact on its flatness accuracy for granite measurement plates. After long-term aging, the rock has a uniform organizational structure, linear expansion coefficient, and internal stress disappears without deformation.

5. The working surface of marble components is easy to maintain during use, with stable material that can remain unchanged for a long time, low coefficient of linear expansion, mechanical properties, rust prevention, demagnetization, and insulation. Not deformed, strong.

6. Scratches and bumps on the work surface do not affect measurement accuracy.

Precautions for mechanical assembly of marble components:

1. The assembly of the wheel requires that the axis lines of the two meshing wheels are in the same plane and parallel to each other, with normal meshing clearance and axial misalignment ≤ 2MM.

2. Lubricant is usually added to the matching surface before fitting or connecting. Especially the bearing parts in the spindle box components and the screw nut parts in the lifting mechanism.

3. The fitting dimensions of matching parts should be accurate, and the fitting dimensions should be rechecked or sampled during assembly. For example, the mating area between the journal of the spindle and the bearing, the hole and center distance between the spindle box and the bearing.

4. The joint surface of the connection should be checked for flatness and deformation, otherwise it should be trimmed, deburred, and the joint surface should be tightly, smoothly, and not skewed.

5. Cleaning and cleaning of good parts. The cleaning work includes removing residual casting sand, rust, chips, etc. Especially some important components, such as gantry cutting machines and inner chambers, should be coated with anti rust paint. Oil stains, rust, or attached chips on the parts can be cleaned with diesel, kerosene, or gasoline as a cleaning solution, and then dried with compressed air.

6. The sealing element should be pressed parallel into the sealing groove, without twisting, deforming, damaging or scratching the sealing surface.

7. The assembly requirement for pulleys is that the axes of the two pulleys are parallel, and the center of the groove should be aligned. If the offset is too large, it will cause uneven tension in the pulleys, resulting in belt slippage and accelerated wear. At the same time, the triangular belt should be selected before assembly, and the length should be consistent to prevent vibration during transmission.

The accuracy advantage of marble components compared to other components:

1. Marble components can also be used as mechanical test benches: suitable for various inspection work, as a reference plane for precision measurement, used as a benchmark for machine tool mechanical inspection and measurement, to check the dimensional accuracy or behavioral deviation of parts. It is favored by the mechanical industry and laboratories.

2. The long-term maintenance of the working environment and height of marble components on site is characterized by the accuracy of the product itself, the determination of the working environment, and the precision and quality of the processed and tested marble components.

3. Marble components are benchmark measuring tools made of stone materials. Marble components are essential workbenches for marking, measuring, riveting, welding, and tooling processes.