Processing technology and usage requirements of inclined pad iron

The inclined pad iron is placed under the equipment base with a pad iron group. By adjusting the thickness of the pad iron group, the equipment can reach the required elevation and level for installation. At the same time, it is convenient for secondary grouting, so that all parts of the equipment base can fully contact the foundation, and the foundation can uniformly bear the weight of the machine equipment and the forces generated during operation.

The mold of the inclined pad iron processing device is a convex platform structure, which can be used to process inclined pads with different inclinations by changing the mold with different inclinations. By increasing or decreasing the number of tire pressing plates and adjusting the relative position of tire pressing plates, various width and length specifications of inclined pad iron can be processed with XLG labor, low processing cost, and small plate loss.

When placing the inclined pad iron, at least one set of pad iron should be placed for each anchor bolt. The pad iron group that does not bear the main load can only use flat pad iron and one inclined pad iron; The pad iron group that bears the main load should use paired inclined pad iron, leveled and welded firmly with electric welding; When bearing the main load and generating strong continuous vibration during equipment operation, the shim group cannot use diagonal shims, only flat shims can be used. The total number of shims in each group should generally not exceed 3. In the shim group, thick shims are placed at the bottom, thin shims are placed on top, and thin shims are placed in the middle.

Diagonal pad iron is mostly used for parts that do not bear the main load (which is mainly borne by the grouting layer), and there should be a flat pad iron under the diagonal pad iron; Open end pad iron is often installed in the form of a support on metal structures or ground planes, and is a case where the support area is small. Its equipment is supported by two or more feet; Hook head paired diagonal pad iron.

The inclined pad iron is used for horizontal and parallel adjustment of various equipment, so that the equipment does not vibrate or tilt during operation. The good operation of the BAOZHENG machine reduces machine wear, and the inclined pad iron is simple and convenient to use KUAIJIE、 It can be manufactured according to the user's needs or made according to the drawings.

After the acceptance of the inclined pad iron shovel hemp surface foundation, some small pits should be excavated on the upper surface of the foundation (except for the place where the inclined pad iron is placed) before the installation of the dosing metering pump equipment. This work is called scraping hemp surface. The purpose of scraping the hemp surface is to ensure that the concrete or cement mortar poured during the secondary grouting can be tightly combined with the foundation, thereby stabilizing the BAOZHENG machine and equipment. There are two methods for shoveling hemp flour: manual method and wind shovel method. The quality requirement for shoveling hemp surface is that there should be 5-6 small pits with a diameter of 10-20mm per 100cm2.