How to distinguish between good and bad 3D flexible welding platforms

The quality and price of 3D flexible welding platforms in the market are diverse, and the processing of 3D platform products with the same specifications and sizes also varies greatly, causing a lot of confusion for users. As a KUAISU tooling product, there is no unified quality inspection standard. How to distinguish between high-quality products and inferior products, and how to distinguish between them, is a concern for many users. Below is a detailed introduction to this knowledge.

1. Distinguishing methods through visual inspection; Legitimate products can be seen from the appearance of the 3D platform, and the working surfaces have undergone nitriding treatment, resulting in a shiny black color on the surface. Poor quality 3D platforms are generally treated with nitriding technology, so the surface will not appear black and shiny, and the working surface hardness is low. Check for casting defects inside the working hole, as it is difficult to detect casting defects inside the hole.

2. YOUZHI's 3D flexible welding platform is cast using HT200 gray iron material, and accurate data can be obtained through chemical composition detection and analysis. However, not all users are equipped with a physical and chemical analysis room, and this distinction has significant limitations.

3. Dimensional measurement and testing methods; The circular holes on the working surface of the 3D welding platform are all machined by CNC, so the hole diameter and spacing errors are very small. All fixture accessories can achieve KUAISU installation. However, inferior 3D platforms use drill bits to drill holes through the drilling die in order to reduce production costs and save processing time. The consistency of the hole spacing and diameter is poor, and there may be hole spacing mismatch when installing accessories. Many holes cannot be KUAISU installed with regular working accessories.

The 3D flexible welding platform belongs to a type of multi functional fixture product. There are two types of cast iron materials: gray cast iron and carbon steel. The 3D platform made of gray cast iron has high stability and is suitable for welding larger workpieces with NAIMO and KANGFUSHI fixtures. The three-dimensional platform for carbon steel welding is generally small in size and suitable for assembling and welding small workpieces. The following is a presentation of the specific details and some tooling components of the 3D flexible welding platform for units that have not yet used it.

The three-dimensional platform for gray iron casting is classified based on the diameter of the working hole. The commonly used aperture is 28mm with a hole spacing of 100mm, while another specification has a diameter of 16mm with a hole spacing of 50mm. The user can choose a suitable 3D flexible welding platform according to their own product size.